Figure 2-21 Ground Cable; Figure 2-22 Ot Terminal - Raisecom Gazelle S1020i-GL Series User Manual

Raisecom
Gazelle S1020i-GL (A) User Manual
connected to the ground cable correctly during installation, which helps avoid
personal injury and equipment damage.
There is a ground terminal on the front panel of the Gazelle S1020i-GL, namely, the chassis
GND. Use the ground terminal to fasten one end of the ground cable to the ground point on
the chassis, and connect the other end to the ground.
Appearance
The ground cable is composed of the ground terminal and conductive wire. In general, the
ground terminal is an OT bare-pressure terminal; and the conductive wire is a yellow/green
copper soft flame-retardant conducting wire.
Figure 2-21 shows the ground cable. Figure 2-22 shows the OT terminal.

Figure 2-21 Ground cable

1
3

Figure 2-22 OT terminal

1
Technical specifications
Table 2-24 lists technical specifications of the ground cable.
Conducting wire
Insulating sheath
Inner diameter of
soldering lug
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
2 Stripped end (connected to the OT terminal)
4 OT terminal
Inner diameter of
2
sheath
2 Hardware structure
3 Thickness of soldering lug
31