Raisecom
Gazelle S1020i-GL (A) User Manual
Figure 2-32 LC/PC fiber connector
When connecting or removing the LC/PC fiber connector, align the connector with the optical
interface, and do not rotate the fiber. Operate the fiber as below:
Wiring
Table 2-35 lists the wiring of the fiber.
Table 2-35 Wiring of the fiber
relationship
Single-fiber
connection
Dual-fiber
connection
To connect the fiber, align the header of the fiber with the optical interface and insert the
fiber into the interface gently.
To remove the fiber, press down the spring clip, and push the fiber header inwards, and
then pull the fiber out.
Wiring
Local optical interface
Optical interface
Optical interface Tx
Optical interface Rx
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Direction of
Peer optical interface
optical signals
<->
Optical interface
->
Optical interface Rx
<-
Optical interface Tx
2 Hardware structure
41