Features; Table 1-1 Features - Raisecom Gazelle S1020i-GL Series User Manual

Raisecom
Gazelle S1020i-GL (A) User Manual

1.3 Features

Table 1-1 shows features of the Gazelle S1020i-GL.

Table 1-1 Features

Basic
features
Ethernet
PoE
Ring
protection
IP service
QoS
Feature
 Login to the device (Console/Telnet/SSH)
 CLI hierarchical protection
 User management, including login authentication, privilege division,
and command management
 File management (BootROM/system file/configuration file)
 System upgrade (BootROM, FTP, and TFTP)
 Time management (timezone, DST, NTP, and SNTP)
 Interface management (Jumbo frame, duplex, flow control, and rate)

Basic configurations of the device (name, language mode, saving or
deleting configurations, and restarting the device)

Task scheduling

MAC address

Basic VLAN (up to 4094 concurrent VLANs), Access and Trunk
interface modes
 Basic QinQ
 STP/RSTP/MSTP
 Loop detection, solving the problem of self-loop and inner loop
 Interface protection, implementing L2 data isolation
 Port mirroring
 Transparent transmission of L2CP
 IEEE 802.3af and IEEE 802.3at PoE
 Non-standard PDs
 Smart PoE
ITU-T G.8032 ERPS
 L3 interface
 ARP
 DHCP Client
 DHCP Server
 DHCP Relay

DHCP Snooping

DHCP Option 82

ACL rules

Trusted CoS and DSCP priorities

Traffic classification and traffic policies (traffic rate limit, redirection,
and remarking based on traffic policy)
 Local priority mapping and queue scheduling (SP, WRR, DRR,
SP+WRR, and SP+DRR)
 Local priority mapping and queue scheduling (SP, WRR, DRR,
SP+WRR, and SP+DRR)
 Interface-based traffic rate limit
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
1 Overview
3