Table of Contents
Advertisement
Installation
3. Place the center log inserting its peg into the hole on
the front of the burner and resting the other end of
the log in the slight depression on top of the left log.
22
4. Carefully spread shale in the cavity of the ceramic
burner. You can also add some shale on cavity outer
edge.
Note: Ensure the area within the pilot shield is clear
of shale pieces.
Pebbles
Place the pebbles on the platform as shown below.
IMPORTANT: Approved for use only with the ceramic
shales provided for your Valor fi replace. The use of
any other products may void your fi replace warranty.
WARNING
Choking Hazard! Ensure that the fireplace
area is clear of shales as these could be
ingested by small children. Vacuum area
after installation.
Fuel Beds
Advertisement
Table of Contents
