Ulvac G-TRAN Series Instruction Manual page 26

4.3.2.2. IO effective in each mode
Remote mode 1
(external IO control) →
→
Effective function
External IO control is effective only when remote mode 1 is set.
When other operation mode is set, only status monitor is available.
4.3.2.3. Communication function effective in each mode
Local mode
(front panel
→
operation)
Load ID
Load
value status
Load status
Load
setting
Control in communication is available only when remote mode 2 is set.
When other operation mode is set, only values (status) can be loaded.
When power is turned on, the previous setting (when power is turned off) is restored.
Remote mode 2
(communication
All IO's
Remote mode 1
(external IO control)
→
Effective function
measurement
combination mode
→
control)
Effective function
Measurement value output (ch1 - 4)
Set point output (1 - 8)
Error status output (ch1 - 4)
Emission valid output or Electrical
discharge OK/NG
→
Load setpoint value
Load setpoint status
Load CAL setting
18
Local mode
(front panel
operation)
Remote mode 1
(communication
control)
Effective function
All communication
functions
→
→