Apply Ac Line Voltage To The Agilent 81200 System; Next Step - Agilent Technologies 81200 Installation Manual

B. Connecting a monitor, keyboard and mouse to the system
If you have not ordered a display and entry panel (option #001), the following devices are required
• Super VGA monitor
• Keyboard with PS2 connector.
• Mouse with PS2 connector.
NOTE: Monitor, Keyboard and Mouse are not supplied as part of the Agilent 81200 Data Generator and
Analyzer System.
Figure 13 Monitor, keyboard and mouse to connect to a standard Agilent E4849B/C mainframe

Apply AC Line Voltage to the Agilent 81200 System

1. Check that the mainframe is set to the appropriate voltage range, required in your country. The
voltage range selector is located at the rear panel. Usually the mainframes leave the factory
prepared for the correct voltage range for the country of destination.
2. Connect all mainframes and all peripherals which require line voltage to the ac line voltage.
Connect the power cord delivered to the line in connector at the rear panel of the mainframe.
Connect the other end of the power cord to an AC Line Voltage outlet which provides the required
power.

Next Step

After making all the required connections the system can be started, go to
page 43
Setting up an Agilent 81200 System based on Agilent E4849B/C Mainframe
Setting up a proprietary System
Mouse
Keyboard
Monitor
"Start the System" on
23