Table of Contents
Advertisement
Figure 8
Monitor to connect at the right side of the Agilent E4840A Small Mainframe
Apply AC Line Voltage to the Agilent 81200 System
Connect the power cord delivered to the line in connector at the rear panel of the mainframe. Connect
the other end of the power cord to an AC Line Voltage outlet which provides the required power.
Next Step
After making all the required connections the system can be started, go to
page 43
Setting up an Agilent 81200 System based on E4840A Small Mainframe
Connect Monitor
Video Cable here
Setting up a proprietary System
"Start the System" on
19
Advertisement
Table of Contents
