Chapter 6
This chapter describes the following procedures:
•
"Adding a Module" on page 56
•
"Removing Modules" on page 58
•
"Adding the Trigger Input Pod" on page 59
•
"Connecting a CD-ROM Drive to the Agilent 81200 System" on page 61
•
"Connecting a Local Printer to the Agilent 81200 System" on page 63
•
"Installing a Network Printer" on page 66
•
"Connecting the Agilent 81200 System to LAN" on page 67
Modify Your System
55