Connecting External Peripherals - Agilent Technologies 81200 Installation Manual

1. Check that all generator/analyzer modules are connected to the clock module by a clock
distribution cable, Agilent part number E4805-61601.
Figure 10 Check whether all modules are connected to clock module

Connecting external peripherals

For displaying and data entry with the Agilent E4849B/C based systems it is possible to connect either
an optional available display and entry panel (Option 001), or a monitor, keyboard and mouse
A. Connecting the Option 001, Display and Entry Panel
On the Display and Entry Panel there are three cables. One cable has the label "Keyboard', another
cable has the label "Touchpad", and the third cable is the display cable.
1. Connect the cable with the label "Keyboard" to the connector on the front panel of the mainframe
with the keyboard symbol
2. Connect the cable with the label "Touchpad" to the connector on the front panel of the mainframe
with the mouse symbol.
3. The third cable has to be connected to the connector named "81200 DISPLAY" on the front panel.
Setting up an Agilent 81200 System based on Agilent E4849B/C Mainframe
Setting up a proprietary System
21