Table of Contents
Advertisement
The Windows NT 4.0 operating system in the Agilent 81200 System is configured to support the
following network protocols:
• TCP/IP
• NetBIOS
The Agilent 81200 System is shipped with default settings of the network parameters, which are:
• IP Address: 192.0.0.1
• Subnet Mask: 255.255.255.0
• Default Gateway: none
• Domain: standalone
You have to collect the necessary information you require in your network. Please ask your local
system or network administrator for help.
When you have collected all the data, please follow the following steps:
1. Click Start button, point to Settings, and then click on Control Panel.
2. Double-click on Network.
Figure 47
Open Control Panel
Double-click
on Network
Connecting the Agilent 81200 System to LAN
69
Advertisement
Table of Contents
