Table of Contents
Advertisement
Setting up an Extended Agilent 81200 System based on Agilent E4849B/C and Agilent E4848B Mainframes
1. Check that all generator/analyzer modules are connected to the clock module by a clock
distribution cable, Agilent part number E4805-61601.
Figure 15
Check Clock Cable Connections in all Mainframes
Connecting external peripherals
It is recommended to use monitor, keyboard and mouse with the extended system only.
Connecting a monitor, keyboard and mouse to the system
If you have not ordered a display and entry panel (option #001),the following devices are required
• Super VGA monitor
• Keyboard with PS2 connector.
• Mouse with PS2 connector.
NOTE:
Monitor, Keyboard and Mouse are not standard deliveries to the Agilent 81200 Data Generator and
Analyzer System. But are available as options.
Setting up a proprietary System
25
Advertisement
Table of Contents
