Setup; Unpacking; Machines With Heat Pump - Electrolux Compass Pro TD6-10 Installation Manual

Installation manual
13

4 Setup

4.1 Unpacking

Cut and remove the two plastic straps between the machine and pallet. There is one strap on each side of the
machine.
fig.7676
Remove the machine from the pallet.
Note!
When moving the machine, handle it with care. The drum has no transport clamps.
Place the machine on its final position.
4.1.1

Machines with heat pump

Note!
Two persons are recommended for the unpacking.
The heat pump unit and the tumble dryer are delivered as one unit.
The machine is delivered complete with supporting feet.
The machine is delivered bolted onto the transport pallet and packed in a crate or box.
Remove packing from the machine.
Remove the screws and the two brackets between the machine and pallet.
fig.W00599
Remove the machine from the pallet.
Note!
When moving the machine, handle it with care. The drum has no transport clamps.
The heat pump unit must only be put down on the feet. It may be tilted a bit on the sides but not completely
tipped over. This will damage the heat pump.
Place the machine on its final position.