Ice Condenser Chamber - Christ Beta 1-8 LSCbasic Operating Manual

→
8.1.2

Ice condenser chamber

Version 03/2018, Rev. 1.5 of 09/03/2020 • sb-dc
Translation of the original operating manual
Cleaning of the freeze-dryer
•
Switch the freeze-dryer off by actuating the mains power switch and
disconnect the power cord from the wall outlet before cleaning.
•
If the freeze-dryer has been contaminated with toxic, radioactive, or
pathogenic substances, clean the inside immediately with a suitable
decontamination agent (depending on the type of contamination, see
chapter 8.2 - "Disinfection of the drying chamber and accessories").
•
Remove product residues thoroughly with a cloth.
•
Open the lid/drying chamber when the freeze-dryer is not in use so
moisture can evaporate.
Before each start-up, ensure that the ice condenser chamber is free from
water residues.
•
Open the media drain valve to drain off any liquid. Then, close the
valve.
•
If necessary, wipe the ice condenser chamber dry with a cloth.
Freeze-dryer Beta 1-8 LSCbasic
Freeze-dryer Beta 2-8 LSCbasic
8 Maintenance and service
75 / 107