Hazards Caused By Improper Connection; Safety Notes Concerning The Operation; Hazards Caused By Electricity - Christ Beta 1-8 LSCbasic Operating Manual

Freeze-dryer Beta 1-8 LSCbasic
Freeze-dryer Beta 2-8 LSCbasic
3 Safety
3.6.4

Hazards caused by improper connection

WARNING
3.7

Safety notes concerning the operation

3.7.1

Hazards caused by electricity

DANGER
26 / 107
Risk of injury caused by consequences of improper connection
Improper connection may lead to a hazardous electrical incident at a later
time during the operation of the freeze-dryer.
This may lead to severe damage to health or even life-threatening injuries.
•
Ensure that the local mains voltage matches the nominal voltage that
is stated on the name plate.
•
Do not place any dangerous material, e.g. glass vessels containing
liquid substances, within the safety area of 30 cm around the freeze-
dryer. Spilled liquids may get into the freeze-dryer and damage the
electrical or mechanical components.
•
Work on the power supply system must only be performed by certified
electricians.
•
Have the electrical equipment of the unit inspected regularly.
•
Defects such as loose or burnt cables must be eliminated immediately.
The following notes and instructions concerning the operation of the freeze-
dryer must be observed in order to protect all persons and property.
Danger of life caused by electric shock
There is a risk of electric shock when touching current-carrying
components.
This may lead to ventricular fibrillation, cardiac arrest, or respiratory
paralysis.
•
Only qualified electritians are authorised to perform work on the
electrical system of the freeze-dryer!
•
The electrical equipment of the freeze-dryer must be checked at
regular intervals by a qualified electrician!
•
Defects such as loose connections or burnt cables must be eliminated
immediately.
Version 03/2018, Rev. 1.5 of 09/03/2020 • sb-dc
Translation of the original operating manual