Christ Beta 1-8 LSCbasic Operating Manual page 50

Freeze-dryer Beta 1-8 LSCbasic
Freeze-dryer Beta 2-8 LSCbasic
6 Operation
NOTE
NOTE
50 / 107
Use the arrow buttons to open the individual windows.
The error message text is always followed by an error code. Always
indicate the error code in the event of enquiries or service requests!
Fig. 26: Details concerning an error message
The texts of the process and error messages are not included in this
operating manual.
The associated documents can be requested from our service
department.
Dialogue box "Operating mode: select/start" (7)
After the set values have been entered for the process, the process can be
started with this function (see chapter 6.5.2 - "Starting a freeze-drying
process").
Fig. 27: Dialogue box "Operating mode: select/start"
(The version of the dialogue box that is displayed depends on the equipment of the
freeze-dryer.)
4
5
6
7
8
Version 03/2018, Rev. 1.5 of 09/03/2020 • sb-dc
Translation of the original operating manual
Error message
Error code
Detailed information
Error counter and
time stamp of the
last error
Arrow buttons