Table of Contents
Advertisement
Industrial Electronic Devices
SET COMMUNICATION:
This section defines the fundamental communication parameters of BACnet.
By Pressing the
"Set
Communication" button from the main window for SW67865 (Fig. 2)
the window "Set Communication" appears (Fig. 3).
The means of the fields for "IO-LINK" are:
In the fields
"Select
Device" the type of IO-LINK channels is defined;
In the section "BACnet Slave" is possible to select the type of BACnet to use from:
BACnet/IP (uses Ethernet);
BACnet MS/TP (uses RS485).
If selected "BACnet/IP" the means of the fields for "BACnet" are:
In the fields
"IP
ADDRESS" the IP address of BACnet/IP side of the converter is
defined;
In the fields
"SUBNET
defined;
In the fields "GATEWAY" the default gateway of the network is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for going
out of the net;
In the field "Port" the port used for BACnet communication is defined. The default
port used for BACnet communication is 47808, but is possible to insert any value;
In the field
"BACnet Device
defined;
In the field
"Device
Identifier" the ID of BACnet/IP side of the converter is defined;
If the field
"BACnet description up to 32
BACnet objects can be up to 32 chars.
ADFweb.com Srl – IT31010 – Mareno – Treviso
Mask" the SubNet Mask of BACnet/IP side of the converter is
Name" the name of BACnet/IP side of the converter is
chars" is checked, the description of the
User Manual IO-Link / BACnet Slave
Document code: MN67865_ENG
Revision 1.000
Figure 3a: "Set Communication" window
INFO:
www.adfweb.com
Page 25 of 44
Phone +39.0438.30.91.31
Advertisement
Table of Contents
