Table of Contents
Advertisement
User Manual IO-Link / BACnet Slave
Industrial Electronic Devices
Document code: MN67865_ENG
Revision 1.000
Page 19 of 44
ETHERNET:
The Ethernet connection must be made using Connector5 of HD67865-xxxx-A1 with at least a Category 5E cable. The maximum length of
the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To connect
the device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC/PLC/other is recommended the use of
a cross cable.
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Advertisement
Table of Contents
