Cassettes; Ordering Spare Parts; Cassette Material; Pressure Lever Cassettes - Ismatec MasterFlex Reglo ICC Operating Manual

8. Cassettes

Your Reglo ICC can use the MS/CA Click-n-Go
See Page 16 for more information. When using new tubing for the fi rst time, depending on
the tubing used (hardness and diameter), the pump may not be primed and can not deliver
the liquid. If that is the case, we recommend you wet the tubing and run the pump with the
tubing inserted for about 15 to 30 minutes.

8.1 Ordering Spare Parts

Order Number Material
IS3510A POM-C
IS3610A PVDF

8.2 Cassette Material

POM-C Polyoxymethylene-Copolymer:
 Good chemical resistance to many organic solvents and strong alkaline chemicals.
 Affected by strong acids and oxidizing substances.
 UV-stabilized and stable up to temperatures of 80 °C/176 °F (dry, continuous use) or
136 °C/277 °F (dry, for a short time).
PVDF Polyvinylidene fl uoride:
 Very good chemical resistance to acids and most aliphatic, aromatic, and chlorinated solvents.
 Not suitable for long contact with esters, ketones, amines, and strong alkaline chemicals.
 Stable both to UV radiation and temperatures up to 110 °C/230 °F (continuous use) or
142 °C/288 °F (for a short time).

8.3 Pressure Lever Cassettes

 Note: Due to the configuration of the Reglo ICC Pump, the use of pressure lever cassettes
is not recommended.

9. Repair

The Reglo ICC is designed for many years of trouble free service. The Reglo ICC does not have
any fuses or adjustments inside the pump. If you wish to attempt any repairs after the warranty
period, please contact your local ISMATEC

10. Cleaning

When replacing the tubes and/or cassettes, the pump head should be wiped to avoid any
debris or residue. The pump head can be cleaned with mild detergent water before and after
duty cycles for extended life. The exterior of the pump can be gently wiped with IPA (Isopropyl
Alcohol). Use a 50% mixture of IPA and water on a lint-free soft cloth to clean the LCD screen.
Do not spray or pour any liquid on the LCD screen.

11. Disposal

Please retain packaging materials until the product warranty ends. Afterwards please discard
packaging materials in an environmentally friendly manner according to local regulations. Once
the useful life of the product has ended, please ensure proper disposal according to local laws.
Plastic and electronic components should be disposed of at a recycling facility. Please refer to
local regulations regarding proper disposal.
REGLO ICC - ENGLISH , REV. D, 14-036-E
® cassettes which accept "3-Stop" tubing.
Cassette
MS/CA Click-n-Go ®
MS/CA Click-n-Go ®
® Distributor for parts.
14 of 36