Operating The Unit; St-Sa-Control Remote Control Panel And Salda Air App - Salda AMBERAIR COMPACT S-CX H Operation, Installation & Maintenance Instructions

Table of Contents

5.6. OPERATING THE UNIT

The air handling unit can be controlled via ST-SA-Control remote control panel, web interface or SALDA AIR mobile application. The unit has

different system modes with different fan speed presets:

• STAND-BY – the system is turned off.

• BUILDING PROTECTION – the main objective of this mode is to protect premises against moisture accumulation.

• ECONOMY – this mode is designed to save energy when people are absent on the premises.

• COMFORT – this mode is used when people are present on the premises.

System modes can be changed by the following functions (in sequential order):

• Weekly Schedule

• Switching on is activated from an external contactor

• Manual mode selection

• Holiday Schedule

• Stand-by mode blocking

More advanced details of unit operation can be found in the Air Handling unit's controller (MCB) manual, section "FUNCTION-

AL DESCRIPTION". Follow the link on the last page of this document.

If the unit is going to be started for the first time be aware to follow the instructions in the section "OPERATIONS PRIOR TO

THE FIRST START".

ST-SA-Control is an easy-to-use remote controller. It connects to the air handling unit's controller via the RS485 interface.

After the Air Handling unit is connected to the mains and the safety switch is turned on, the remote controller should load up and connect to the

unit's controller (connection can be automatic or manually chosen). Adjuster's user password by default – 1111.

SALDA AIR is a mobile application (may be downloaded from Google Play Store or Apple App Store) that allows users to control AmberAir Com-

pact units using a Smartphone or tablet. The application can access the air handling unit's controller via a local network with a WIFI access point

(the unit must be connected to the local network through MB-Gateway device).

After the Air Handling unit is connected to the mains, connected to the local network (via MB-Gateway) and the safety switch is turned on, the

Smart device can connect to the same local network and use the SALDA AIR application to automatically or manually access the unit's controller.

Adjuster's user password by default – 1111.

To change the fan speed (different mode) on the remote controller or mobile application, press SYSTEM MODE on the main screen ant select the

desired speed (mode). Shortly after the mode is set, the fan speed will change.

AMBERAIR COMPACT S-CX v2023.3

Fig. 5.6.1.1 ST-SA-Control remote controller

Fig. 5.6.1.2 SALDA AIR application

EN |

Table of Contents