Tadiran Telecom FlexSet-IP 280S User Manual page 50

Flash on Trunk is used to send a signal through the system to trunk lines in order to operate certain types of
[FlshTk]
features that are available on the second system. The second system is a telephone switching center, PABX or
another Coral system. This feature is also known as Calibrated Opening.
Number is used to briefly display the trunk dial number instead of the name.
[Number]
Not used during ringback.
[Park]
Stop Dialing is not used during ringback. Press this button before you hear ringback tone, in order to notify
[StopDl]
the system when dialing out has been completed. In response the system sends your call immediately towards
the destination without waiting inter-digit time out.
OCC is used for users connected with pulse trunks and/or for when your FlexSet is defined with Auto
[OCC]
Transfer. This feature enables you to send touch-tone dialing (DTMF tones) over non-DTMF trunks or
stations for applications or services (such as Voice Mail) requiring DTMF tones. See
(DTMF) for Other Common Carriers (OCC) on page 180
Not used during ringback.
[Series]
Camp On, also known as Call Back. When a network station does not answer, you may request that the
[CampOn]
system automatically call you back when the required destination number is available. See
Receiving on page 79
Operating the FlexSet
Making External Calls
.
39
.
FlexSet-IP 280S User Guide
Touch-Tone Dialing
Calls Waiting: