Tadiran Telecom FlexSet-IP 280S User Manual page 32

When the Phone is programmed as Headset Only and for SPKR On/Off key
When your phone is equipped with a headset:
When the Headset Only feature is activated (see
release) switch, you can answer and disconnect calls by pressing
When the key LED is lit:
You are connected. Pressing the lit key will disconnect the call.
Disconnecting calls:
Press the lit key.
SPKR
NOTES!
• See your system administrator to program SPKR to operate as an On/Off switch.
• When the phone is set for Zip Tone mode (see
through the speaker.
• If the phone is defined as Headset Only (see
Operating the FlexSet
Using the Speakerphone or Headset
Headset Only on page 126)
.
SPKR
page 234), the ring sounds at the headset only, rather than
Headset Only on page
21
, and is set to operate as On/Off (connect/
SPKR
126), the speakerphone will not operate.
FlexSet-IP 280S User Guide