Group Calls: Temporary Conference Activation - Tadiran Telecom FlexSet-IP 280S User Manual

Group Calls: Temporary Conference Activation

The Temporary Conference feature allows an authorized user to establish an Add-On (Temporary) Group Call by adding
participants as the conference is being set up. For this purpose, vacant Group Calls containing no preset members are defined
system-wide. The Group Call initiator adds members from his/her station. A Temporary Group Call may include internal
stations and/or external telephone numbers via a public speed call library. A few preset group calls may be joined to an Add-
On Group Call via Public Libraries.
Calling a Temporary Group:
1. Press .
[GpCall] [AddOn]
2. Listen for the dial tone.
3. Dial the Group Call access code.
4. Press .
[AddPrt]
5. Dial the required station and/or Public Library. To add additional members, repeat from Step
Up to 5 or 14 destinations can be added, depending on the system configuration.
6. To delete a participant, press
basis – the participant added most recently will be deleted first, followed by the next most recent, and so on.
7. Press to initiate the Group Call.
[Call]
All the called stations will now start ringing. As each member joins you will hear a warning tone (if defined system-
wide).
8. Start speaking when the CONF COMPLETED message appears momentarily on the display (the message indicates that all
non-answered stations have stopped ringing).
Station Telephony Features
Group Calls: Temporary Conference Activation
. Press again to delete additional participants. This operates on a last-in-first-out
[DelPrt] [DelPrt]
118
.
1
FlexSet-IP 280S User Guide