Headset Only - Tadiran Telecom FlexSet-IP 280S User Manual

Headset Only

The feature is designed for users operating in Headset mode. It is of particular value at information centers where the headset
option is the most efficient way of communication. When activated, the Headset Only feature causes calls to be conducted via
the headset and disables the FlexSet's microphone and loudspeaker, along with the features that use these devices, e.g. voice
page, etc. Calls are conducted via the headset even if the cradle switch is on-hook, enabling a user to make full use of the
hands-free operation.
NOTES! When utilizing Headset Only feature:
• The SPKR key should be programmed as an ON/OFF (connect/release) key. See your system administrator.
• The phone can be set for Zip Tone mode. This mode is used to sound the ring tones directly through the
headset, rather than through the speaker. (For Zip Tone setup, see
• Refer to page 21
To activate Headset Only:
•
Press [Setup] [HeadSt]
A bullet appears to the left of
To disable Headset Only:
•
Press [Setup] • [HeadSt]
Station Telephony Features
Headset Only
for instructions on operating a
.
[HeadSt]
page
FlexSet
programmed as Headset Only.
126
234)
FlexSet-IP 280S User Guide