Tadiran Telecom FlexSet-IP 280S User Manual page 184

2. At the prompt, dial the station number of the original destination (1
• To monitor the 1
• To monitor the 2
• To cancel Split Silent Monitor, press
NOTE! If you hear the reorder tone when attempting to monitor a call, the port is SECURED against
monitoring.
2-Way Silent Monitoring is used to monitor both sides of a 2-way conversation simultaneously. This feature
[S.Mon2]
can be activated from idle, or while attempting to call a busy or non-answering destination.
NOTE! This feature requires a CNSsl card, an 8DRCF, an 8DRCM card or a CNF card to be installed in
the system. When a CNF card is installed, it must be defined as C3-WAY.
Operating from idle:
1. Press .
[S.Mon2]
2. At the prompt, dial the station number.
Options available while monitoring:
• To cancel 2-way Silent Monitor, press
st
• To whisper to the 1 party, press
Operating upon hearing busy or ringback tone:
1. Dial the station.
2. Upon hearing busy or ringback tone, press
OR
Press and dial 9.
[Xfer]
Station Telephony Features
Silent Monitoring
st
conversing party, choose
nd
conversing party, choose
SPKR
, or hang up.
[Abort] SPKR
.
[WhspPg]
.
[S.Mon2]
173
st
party), then:
or dial the cancellation code
[Origin]
or dial the activation code
[Prtner]
or hang up.
FlexSet-IP 280S User Guide