Tadiran Telecom FlexSet-IP 280S User Manual page 162

3. Dial the station number at which the call was parked. If more than one party has been placed on Park, scroll between
names by using .
[Next]
4. Begin speaking.
Retrieving a Parked Call (from the originating station where the call was parked):
Press the flashing ,
LOOP LINE
OR
1. Press .
[Park]
2. Choose or dial the activation code . If more than one party has been placed on Park, scroll between names by
[ReConn]
using , or by pressing the
[Next]
3. Begin speaking.
Return Call:
If the parked call is not picked up within a predetermined time (system-defined timeout), the call will automatically return to
the originating station from which the park was made.
1. Press SPKR or pick up the handset to answer.
2. Begin speaking.
NOTE! More than one call can be parked at a single station, but calls are retrieved on a first-in, first-out
basis (FIFO). That is, the first parked call (first-in) will be the first call that is picked up (first-out).
However, if multi-parking is required it is recommended that the Page Queue feature be used
instead (see
Station Telephony Features
Park
, or DSS key and begin speaking.
button.
RECALL 2nd party#
→
DND Mute
Page Queue on page 142).
FwdAll All-E Number
151 FlexSet-IP 280S User Guide