Tadiran Telecom FlexSet-IP 280S User Manual page 237

system features.
See
Programming: Feature Keys on page 153
Preference is used to prioritize specific trunk or line connections for your FlexSet. This causes the system to
[Prefer]
automatically choose the available line, loop or trunk in prioritized order when placing a call (lifting the
handset, pressing
To view the priorities:
1. Press
[Next]
2. Listen for the confirmation tone.
To cancel priorities:
1. Press dial the cancellation code .
2. Listen for the confirmation tone.
To select priorities:
1. Select the required destinations by pressing the programmed DSS keys.
You can program a maximum of six priorities in any order:
• OUTSIDE Line: trunk/trunk group/dial service or routing access
• LOOP (default access code #121)
• LOOP Originating Only (default access code #125)
• Boss Group Line Key
• ELA Line Key
2. Press dial the activation code
3. Listen for the confirmation tone.
NOTES!
• If you intend to select an OUTSIDE line as the first priority, you must program a LOOP or LINE key to be able to
dial internal numbers. When activating a feature, press LOOP or LINE first, then dial the required number.
Setup
Coral Telephony Features
or dialing a number).
SPKR
or the button to scroll through the list.
for instructions on how to program a DSS key.
226 FlexSet-IP 280S User Guide