Getting Started - 3Com SuperStack 3C16115 User Manual

Getting Started

The Getting Started command allows you to quickly configure or view
basic setup information for the Webcache.
To configure basic setup information:
1 At the Top-level menu, enter:
gettingStarted
The following prompt is displayed:
Enter system name:
2 Enter a system name for the Webcache. The name can be up to 80
characters long.
The following prompt is displayed:
Enter system contact:
3 Enter a system contact for the Webcache. The name can be up to 80
characters long.
The following prompt is displayed:
Enter system location:
4 Enter a physical location for the Webcache. The location name can be up
to 80 characters long.
The following prompt is displayed:
Enter IP address [192.168.1.253]:
5 Enter a valid IP address.
The following prompt is displayed:
Enter subnet mask [255.255.255.0]
6 Enter a valid subnet mask.
The following prompt is displayed:
Enter gateway IP address [0.0.0.0]:
7 Enter a valid gateway IP address.
The following prompt is displayed:
Enter host name
8 Enter a valid host name.
The following prompt is displayed:
Enter domain name
Getting Started 115