Logging In As A Default User; Accessing The Web Interface - 3Com SuperStack 3C16115 User Manual

58 C 4: M
HAPTER ANAGING THE
Logging in as a
Default User
Accessing the Web
Interface
W
EBCACHE
If you manage the Webcache using the Web interface or the Command
Line Interface, you need to log in with a valid user name and password.
The Webcache has one user name, which is listed in Table 9. You cannot
create new user names for the Webcache.
Table 9 User Names
Default
User name Password
admin (no password) The user can access and change all manageable
CAUTION: To prevent unauthorized access and configuration of the
Webcache, 3Com recommends that you set a password for the admin
user name as soon as possible.
The admin user name is case-sensitive.
To access the Web interface:
1 Open the Web browser on the management workstation. To display the
Web interface correctly, use one of the following Web browsers:
Microsoft Internet Explorer v4.0
I
Microsoft Internet Explorer v5.0
I
Microsoft Internet Explorer v5.5
I
Netscape Communicator v4.5
I
Netscape Communicator v4.6
I
Netscape Communicator v4.7
I
Netscape Navigator version 6 is not supported by the Webcache.
For the browser to operate the Web interface correctly JavaScript and
Cascading Style Sheets must be enabled on your browser. These features
are enabled on a browser by default. You will only need to enable them if
you have changed your browser settings. Also the Web interface has
Access Level
parameters