Resetting Ip Information To Factory Default Settings; Pinging Other Devices - 3Com SuperStack 3C16115 User Manual

4 Enter a valid Domain Name System (DNS) Server IP address.
Resetting IP
Information to
Factory Default
Settings
1 At the Top-level menu, enter:
2 Enter
Pinging Other
Devices
1 At the Top-level menu, enter:
2 Enter the IP address of the device that you want to PING.
The following prompt is displayed:
Enter DNS Server IP address [196.168.100.3]:
You can reset all IP information on the Webcache to factory default
settings using the
initializeConfig
To reset IP information to factory defaults:
protocol ip initializeConfig
The following prompt is displayed:
WARNING: This change will lock out all SNMP, Telnet and Web
management access. Do you wish to continue (yes,no)[no]: no
to reset the IP address for the Webcache.
yes
The PING feature allows you to send out a PING request to test whether
devices on an IP network are accessible and functioning correctly. This
feature is useful for testing that the Webcache is installed and set up
correctly, and that your network connections are working.
You can PING other devices on your network using the
on the IP menu.
To PING a device:
protocol ip ping
The following prompt is displayed:
Enter destination IP address:
The Webcache sends a single PING request to the specified device and a
message similar to the following is displayed:
Starting ping, resolution of displayed time is 10
milli-seconds
If the device is accessible and functioning correctly, a message similar to
the following is displayed:
Displaying and Changing IP-related Information
command on the IP menu.
119
command
ping