Table of Contents
Advertisement
Accessing the Web Interface
To access the Web interface:
1 Open the Web browser on the management workstation. To display the
Web interface correctly, use one of the following Web browsers:
Microsoft Internet Explorer v4.0
I
Microsoft Internet Explorer v5.0
I
Microsoft Internet Explorer v5.5
I
Netscape Communicator v4.5
I
Netscape Communicator v4.6
I
Netscape Communicator v4.7
I
Netscape Navigator version 6 is not supported by the Webcache.
For the browser to operate the Web interface correctly JavaScript
Cascading Style Sheets must be enabled on your browser. These features
are enabled on a browser by default. You will only need to enable them if
you have changed your browser settings. Also the Web interface has
been optimised for PC screens with the desktop area set to 800 by 600
pixels. 3Com recommends that you set the font size to Small Fonts.
2 In the Location/Address field of the browser, enter the URL of the
Webcache. This must be in the format:
http://nnn.nnn.nnn.nnn:8081
where
nnn.nnn.nnn.nnn
the port on which the Webcache listens. You must enter
port number to successfully access the Webcache using your browser.
192.168.1.253 is the default IP address of the Webcache.
In Netscape, you can enter a shortened URL such as 192.168.1.253:8081
and Netscape successfully accesses the Webcache. In Internet Explorer,
however, this URL is not recognized. You must include "http://" at the
start of the URL i.e. http://192.168.1.253:8081.
3 When the browser has located the Webcache, a user name and password
screen is displayed as shown in Figure 14.
Setting Up the Webcache for Management
is the IP address of the Webcache and
39
™
and
is
8081
and the
http://
Advertisement
Table of Contents
