Accessing The Webcache Via Telnet; Solving Web Interface Problems - 3Com SuperStack 3C16115 User Manual

Proxy servers
Hide thumbs Also See for SuperStack 3C16115:
Table of Contents

Advertisement

130
C
13: P
HAPTER
ROBLEM
Accessing the
Webcache via
Telnet
Solving Web
Interface Problems
S
OLVING
The terminal or terminal emulator can no longer access the
Webcache over the network.
Check that the connections and network cabling for the LAN port are in
place.
If there is still a problem, try accessing the Webcache through a different
port. If you can now access the Webcache, a problem may have occurred
with the original port. Contact your supplier for further advice.
You cannot access the Webcache using Telnet.
Check that:
The network cables are secure.
I
The network cable used to access the Webcache is connected to the
I
LAN port.
The Port Activity LED on the Webcache LAN port is Green or Green
I
Flashing.
The duplex settings are as expected by the rest of your network.
I
You can ping the Webcache.
I
The terminal or terminal emulator is set to VT52 or VT100 mode.
I
Press Return a few times to wake up the CLI.
I
The Web interface is not displayed in the Web browser.
The Web interface can be accessed by any browser that conforms to the
following W3C standards: HTML 4.0, CSS 1.0, DOM, ECMA 262. To
display the Web interface correctly, use one of the following Web
browsers:
Microsoft Internet Explorer v4.0
I
Microsoft Internet Explorer v5.0
I
Microsoft Internet Explorer v5.5
I
Netscape Communicator v4.5
I
Netscape Communicator v4.6
I
Netscape Communicator v4.7
I
Netscape Navigator version 6 is not supported by the Webcache.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SuperStack 3C16115 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents