Table of Contents
Advertisement
If you selected Upgrade Later, the Finish screen is displayed. Click Finish to
exit the Upgrade Software wizard.
If you selected Discard Upgrade, the Finish screen is displayed. Click Finish
to exit the Upgrade Software wizard.
6 Carefully read the summary information, which displays the name of the
software image file, its software version and the date on which it was
created. Click Finish to start the upgrade.
7 The software upgrade may take several minutes to complete. The
Software Upgrade Successful screen is displayed when the software
upgrade has been successful.
8 Click OK to exit the Upgrade Software wizard and reboot the Webcache.
This will complete the software upgrade. The Device View is displayed in
the Web interface.
Performing a Manual Software Upgrade
You can manually perform a software upgrade by downloading and
locating the software upgrade file yourself. You must disable automatic
software upgrade detection before you can perform a manual upgrade;
for more information see "Detecting Software Upgrades"on page 98.
Also, you can only perform a software upgrade if you have downloaded a
newer software version than the one that is currently installed on the
Webcache. To do this:
1 Log in to the Web interface.
2 Click Device View on the Toolbar.
3 Select System -> Control -> Upgrade Software in the Navigation Tree.
The first screen of the Upgrade Software wizard is displayed. Click Next.
4 In the Webcache Software Image field, enter the network path and
filename of the software image file that you want to upgrade to.
You can click Browse to search for the location of a software image file.
Click Next.
5 The Webcache will verify if the file that you have selected is valid. If it is
not valid, the software upgrade fails.
6 If the file is valid, the final screen of the wizard is displayed. Carefully read
the summary information, which displays the name, software version and
creation date of the current software image file and the new software
image file that you are upgrading to. Ensure that the software image is
the one that you want to upgrade to. Click Finish to start the upgrade.
Performing a Software Upgrade
101
Advertisement
Table of Contents
