Displaying Ip Summary Information; Tracing Ip Addresses - 3Com SuperStack 3C16115 User Manual

120 C 12: C
HAPTER OMMAND
Displaying IP
Summary
Information

Tracing IP Addresses

L I
INE NTERFACE
64 bytes from 192.156.136.22: icmp_seq=0 ttl=248 time=195.2
ms
If the device is not accessible, or is not functioning correctly, a message
similar to the following is displayed:
No answer from 192.156.136.22
You can display IP summary information for the Webcache using the
command on the IP menu.
summary
To display the IP information, at the Top-level menu, enter:
protocol ip summary
The IP information for the Webcache is displayed.
An example of the IP information is shown below:
IP address: 196.168.100.1
Subnet mask: 255.255.255.0
Default router: 196.168.100.2
Host Name: webcache
Domain name: mycompany.com
DNS address: 196.168.100.3
The Trace Route feature allows you to display the network hops from the
Webcache to a device on an IP network. This feature is useful for testing
that the Webcache is installed and set up correctly, and that your network
connections are working.
You can perform a trace route to other devices on your network using the
command on the IP menu.
traceRoute
1 At the Top-level menu, enter:
protocol ip traceRoute
The following prompt is displayed:
Enter destination IP address:
2 Enter the IP address of the device that you want to trace.
The Webcache sends a trace route request to the specified device and a
message similar to the following is displayed:
traceroute to 191.128.40.121, 30 hops max, 38 byte packets