Exiting The Command Line Interface; Displaying And Changing Ip-Related Information - 3Com SuperStack 3C16115 User Manual

Exiting the
Command Line
Interface
Displaying and
Changing IP-related
Information
The following prompt is displayed:
Retype password:
16 Re-enter the new password. A message is displayed informing you that
the password has been successfully changed.
The following prompt is displayed:
Please enter mode of operation (proxy, transparent) [proxy]:
17 Enter either
proxy
For further information, see "Deploying the Webcache in Your Network"
on page 33.
If you entered
proxy
Enter caching port number
18 Enter the port number on which the Webcache will listen for traffic.
The Finish prompt is displayed, which summarises the selections that you
have made.
You can exit the Command Line Interface at any time using the
command on the Top-level menu.
To exit the Command Line Interface, at the Top-level menu, enter:
logout
If a period of inactivity lasts longer than 30 minutes, the Webcache will
automatically log you out.
After the exit, the first key that you press returns you to the login
sequence.
You can display and change the IP-related information for the Webcache
using the commands on the IP menu. These commands allow you to:
Specify basic IP management configuration
I
Configure the Domain Name System settings
I
Reset IP information to factory default settings
I
Send out a PING request
I
Display IP summary information
I

Exiting the Command Line Interface

or .
transparent
, the following prompt is displayed:
117
logout