Network Configuration Concepts; Ip Addresses - 3Com SuperStack 3C16115 User Manual

Network
Configuration
Concepts

IP Addresses

The following sections explain certain key concepts of configuring your
network, which you must understand in order to set up the Webcache
successfully.
If you are uncertain about what IP addresses to assign your equipment,
contact your network administrator.
To operate correctly, each device on your network (for example a
webcache or management station) must have a unique IP address. IP
addresses have the format nnn.nnn.nnn.nnn where n is a decimal
number between 0 and 255. An example IP address is '192.168.100.8'.
The IP address can be split into two parts:
The first part ('192.168' in the example) identifies the network on
I
which the device resides.
The second part ('100.8' in the example) identifies the device within
I
the network.
If your network is internal to your organization only, you may use any
arbitrary IP address. We suggest you use addresses in the series
192.168.100.X (where X is a number between 1 and 254) with a subnet
mask of 255.255.255.0.
These suggested IP addresses are part of a group of IP addresses that
have been set aside specially for use "in house" only.
CAUTION: If your network has a connection to the external IP network,
you must apply for a registered IP address. This registration system
ensures that every IP address used is unique; if you do not have a
registered IP address, you may be using an identical address to someone
else and your network will not operate correctly.
Obtaining a Registered IP Address
InterNIC Registration Services is the organization responsible for
supplying registered IP addresses. The following contact information is
correct at time of publication:
World Wide Web site: http://www.internic.net

Network Configuration Concepts

45