Visual Alerting; Setting Call Pickup Indication - Avaya J139 Using Manual

3. Scroll to Phone and press Select.
4. Scroll to Mute alerting option.
5. Press Toggle to select one of the following:
• Audible: The phone beeps to notify that you have muted your phone.
• Visual: The phone displays the mute icon after some time on the phone status line.
• Both: The phone beeps and displays a mute alert message.
• None: The phone disables the mute alert.
6. Press Save.

Visual alerting

The beacon LED works in the following manner to indicate incoming calls and messages:
• If there is an incoming call, the beacon LED blinks.
• If there are new voice mail messages, the beacon LED is lit continuously.
• If the speaker is on during an active call and there are new voice mail messages, the beacon
LED turns off every 15 seconds.
• If the call is on hold, the beacon LED stops flashing.
Setting visual alerting
About this task
Use this procedure to set visual alerting for an incoming call and message.
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll to Phone and press Select.
4. Use the Down Arrow key to go to the Visual alerting.
5. Press Change to activate or deactivate visual alerting.
6. Press Save.

Setting call pickup indication

About this task
Use this procedure to set call pickup indication for a call answered on behalf of your pickup group
member.
February 2021 Using Avaya J139 SIP IP Phone in Avaya Aura
Comments on this document? infodev@avaya.com
Phone
®
91