Setting Mute Alert; Visual Alerting - Avaya J189 Using Manual

3. Scroll to Phone and press Select.
4. Select Assign speed dial entries.
5. Use the Down Arrow key to go to the Speed Dial contact that you want to replace or clear.
6. Press one of the following:
• Replace: To replace the contact with another contact.
• Clear: To remove the contact from the Speed Dial.
7. Press Replace or Clear when the phone prompts for confirmation.

Setting Mute alert

About this task
Use this procedure to receive a notification alert when your phone is on mute and you try to
answer a call.
Before you begin
Ensure that the feature is activated by the administrator. Contact your administrator for details.
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll to Phone and press Select.
4. Scroll to Mute alerting option.
5. Press Toggle to select one of the following:
• Audible: The phone beeps to notify that you have muted your phone.
• Visual: The phone displays the mute icon after some time on the phone status line.
• Both: The phone beeps and displays a mute alert message.
• None: The phone disables the mute alert.
6. Press Save.

Visual alerting

The beacon LED works in the following manner to indicate incoming calls and messages:
• If there is an incoming call, the beacon LED blinks.
• If there are new voice mail messages, the beacon LED is lit continuously.
• If the speaker is on during an active call and there are new voice mail messages, the beacon
LED turns off every 15 seconds.
April 2021 Using Avaya J189 SIP IP Phone in Avaya Aura
Comments on this document? infodev@avaya.com
Phone
®
109