Making A Call Using Uri Dialing; Multiple Device Access - Avaya J139 Using Manual

4. Enter the extension you want to call.
5. Press Enter or OK to immediately start dialing the priority call to the extension where the
call appearance will show the incoming call as a priority call.

Making a call using URI dialing

Before you begin
• Ensure that you have the URI of the extension number.
• Ensure that the Edit dialing feature is enabled in your phone.
Procedure
1. Enter the number that you want to call.
Press abc, or 123 softkey to change between the input methods.
Note:
Press the Backspace softkey to delete the characters you have entered.
2. Enter the complete URI that you want to call.
3. Press the Call softkey to make the call.

Multiple Device Access

With the Multiple Device Access (MDA) feature, you can register up to 10 SIP devices with the
same extension to transfer active calls between devices.
This feature is available only in an Avaya Aura
®
on Avaya Aura Session Manager.
MDA limitations
The limitations for Multiple Device Access are the following:
• There is no audio or visual alerting for the third incoming call if two call appearances are
already in use.
• When you receive an MDA indication, press the Phone button to view the details and join the
bridged call.
Related links
Handling calls and conferences using Multiple Device Access
Adding a participant to no hold conference
February 2021
®
environment. Multiple Device Access is configured
on page 79
Using Avaya J139 SIP IP Phone in Avaya Aura
Comments on this document? infodev@avaya.com
Making a call using URI dialing
on page 31
®
77