Installation For Windows Nt; Running Setup - 3Com 3CCFEM556 User Manual

4
This chapter describes how to install the LAN+Modem card
under Windows NT 4.0. If you have problems installing the
driver, make sure your version of NT is updated with the
latest Microsoft service pack release (Service Pack 3 or
greater).
Network driver updates are available on 3Com's World Wide
Web site at http://www.3com.com. The drivers are in the
Support area. Locate the Support Welcome screen, Select
Network Interface Cards, then select Software/Drivers. You
can also obtain the latest drivers the 3Com Support BBS at
1-408-980-8204.

Running Setup

The Setup program:
Use the following procedure to run Setup and install your
LAN+Modem card. If you need help at any time while
Setup is running, click Help.
Before running Setup, insert the LAN+Modem card in the
computer as described in Chapter 2, "Inserting and
Connecting the Card."
1 Insert Installation Disk 1 into your computer's floppy
drive.
2 Click Start.
3 Click Run.
4 Enter a:\setup
I
NSTALLATION FOR
W
INDOWS
Copies diagnostics files to your hard drive
Lets you register your LAN+Modem card on line
NT 4.0