3Com 3CCFEM556 User Manual page 8

2 C 1: I
HAPTER
Features of the LAN+Modem card include:
Parallel Tasking
Simultaneous LAN and modem connections when
installed under Windows 95 and Windows NT.
Support for both 10BASE-T (Ethernet) and 100BASE-TX
(Fast Ethernet) standards.
56 Kbps modem using v.90 technology. 16-bit modem
architecture and serial-port interface capable of up to
53 Kbps for superior modem throughput. Simultaneous
compatibility between V.90 and x2 technology.
V.90 modems are capable of receiving at up to 56 Kbps
and sending at up to 31.2 Kbps. Due to FCC regulations,
receiving speeds are limited to 53 Kbps. Actual speeds may
vary. Requires compatible phone line and server equipment.
Complies with both the V.90 56K standard and x2
technology protocol. Standard officially determined in
February 1998; ratification expected in September 1998.
See http://www.3com.com/56K for details.
Digital Line Guard
from being damaged by overvoltage from ISDN or
digital PBX lines.
Battery power conservation through automatic power
management for both the LAN and modem functions.
Diagnostics programs for Windows 95 and Windows
NT that let you test and configure the card.
Windows 95 Plug-and-Play support.
Support for flash upgrades of modem firmware.
Modem data transmission through cellular telephones
using an optional cellular upgrade kit.
Communications and fax software for Windows 95
(included in the package on a separate diskette).
Driver support for Microsoft
NDIS4) and Novell
Support for the network management capabilities of
3Com's Transcend
Distributed RMON (dRMON) SmartAgent PC software.
Supported network management applications can
retrieve performance data and error statistics from the
LAN+Modem card.
Lifetime warranty.
NTRODUCTION
®
architecture for high throughput.
™
®
®
, which protects the card circuitry
®
(NDIS2, NDIS3, and
®
NetWare (ODI) networks.
PC Link SmartAgent
™
software.