9
Monitoring the LAN LEDs
The status LEDs on the network connector are used for
verifying the integrity of the link between the LAN+Modem
card and the network hub (Figure 10, Table 1). The PC Card
must be connected to the network (see Chapter 2) and
the network driver must be installed (see Chapter 3).
Figure 10 Network Connector LEDS
Table 1 LED Descriptions
LED
Description
10 LNK
Green:
Link integrity
100 LNK
Green:
Link integrity
D
IAGNOSTICS AND
T
ROUBLESHOOTING
Steady
Good 10BASE-T
connection
between PC Card
and hub
Good
100BASE-TX
connection
between PC Card
and hub
Off
No connection between card and
hub.
(Off when 100 LNK LED is on.)
No connection between card and
hub.
(Off when 10 LNK LED is on.)