3Com 3CCFEM556 User Manual page 31

Running Setup to Install Microsoft Network Clients
8 After restarting your computer, run the PC Card
Installation Test that appears on your screen. Besides
testing modem functions, it registers the
LAN+Modem card with 3Com.
9 Using the Windows menu, select Network.
10 From the Options menu, select Change Network
Settings.
11 In the Network Setup dialog box, select the
Networks... button.
12 Select Install Microsoft Windows Network and then
click OK.
13 Select the Drivers... button.
14 In the Network Adapters dialog box, click Add
Adapter.
A dialog box appears, listing the supported network
adapters on the disk.
15 From the list of network adapters, select Unlisted Or
Updated Network Adapter, and click OK.
16 Specify C:\MHZ or another path as chosen in step 5.
17 Select 3Com Megahertz 10-100 + 56K PC Card and
click OK.
18 Click OK.
19 In the Network Adapters dialog box, click Close.
20 In the Network Setup dialog box, click OK.
21 If prompted, supply the information you gathered
before you began the installation. After you enter
the information, click OK.
A message appears, prompting you to restart your PC.
22 Click Continue instead.
23 If you are not using Card Services and you have a
memory manager (all PCs running Windows have a
memory manager), you must exclude the CIS memory
address range for the LAN+Modem card and other
Card Services devices. (Refer to "Avoiding Memory
Manager Conflicts" in Chapter 7 for details.)
25