3Com 3CCFEM556 User Manual page 54

48 C 9: D
HAPTER
To run the diagnostics test:
1 Start CONFIG from Installation Disk 2 by typing:
a:\config.exe
2 From the main menu, select Configuration and
Diagnostic Program and press [Enter].
Follow the instructions provided on the Diagnostics screen.
Press [F1] for a description of the available diagnostics.
Accessing CONFIG Help Topics
The CONFIG program includes a library of information on
loading drivers and setting up a networking environment
for your computer. This information is accessible from any
DOS window. To start CONFIG, put Installation Disk 2 in the
disk drive and run a:\config.exe. If accessing Help
only, you do not have to reboot under DOS as described on
the previous page.
From the Main Menu, select a topic or family of topics and
press [Enter]. For a brief description of a menu item,
highlight it and press [F1]. Table 2 lists the topics available
through the CONFIG main menu.
Table 2 CONFIG Information Library
Menu Item
Installation Tips
Microsoft Windows
Information
Auto Install and
Config for NetWare
Driver Installation
and Update
(continued)
T
IAGNOSTICS AND ROUBLESHOOTING
Description
For a list of topics covered under
Installation Tips, refer to Table 3.
General installation information for all
Windows environments.
How to use AutoLink to install NetWare
drivers under DOS
Information on Novell NetWare drivers.
How to display the NDIS driver version and
update drivers for DOS ODI.
NDIS driver installation and information.
Setup for all Windows environments.
Software compatibility information: the
current list of compatible software and
hardware.