Removing The Lan+Modem Card - 3Com 3CCFEM556 User Manual

12 C 2: I C C
HAPTER NSERTING AND ONNECTING THE ARD
Figure 9 Disconnecting Cables from the Card

Removing the LAN+Modem Card

To remove the card, reverse the installation procedure. On
most systems, you do not have to power down the computer
before removing the card. See "Hot Swapping," below.
Some card slots have buttons or levers for ejecting the card.
Check your computer manual for information on removing
cards. Store the card in its original or similar packaging.
Hot Swapping
If you are using the point enabler, you cannot hotswap
the LAN+Modem card. If you are using Card and Socket
Services or Windows 95, you can remove the LAN+Modem
card without turning the computer off.
CAUTION: Do not remove the modem when a data
transmission is taking place. Exit your communications
application before removing the card.