Using Memory Management; Windows Nt 3.51 Installation - 3Com 3C389 User Manual

Using Memory Management

The Microsoft Windows for Workgroups PC Card software
installation is now complete.

Windows NT 3.51 Installation

The NDIS 3.0 device driver for Windows NT 3.51 or
higher requires that Service Pack 2 or higher be installed
with your Windows NT system. It will function only in a
PC with an Intel 82365SL or compatible socket controller.
Windows NT does not support the Databook socket
controllers at this time. Check your PC user guide to
determine which controller is in your PC.
Make sure that the 3C389 PC Card with cable attached is
inserted before installing Windows NT.
1 On the Windows NT desktop, open the program
group Main.
2 In the Main Window, double-click the Control Panel
icon.
3 In the Control Panel Window, double-click the
Network icon.
If you are using Card and Socket Services, the program
will default to Autoset mode, which allows the LAN
driver to negotiate with Card and Socket Services for
available resources. LANAID will allow you to select
values for resources to be used by your 3C389 PC Card
such as Interrupt, memory, and I/O Base Address.
If you are not using Card and Socket Services in
Autoset mode, you must ensure that the values that
you select for Interrupt, MMIO, and SRAM do not
conflict with those for other PC Cards and resources
installed in your PC (such as video, sound, COM port).
If you are using EMM386, in most cases the memory
exclusions will be automatically handled by LANAID.
If you are using a memory manager, you must exclude
the memory ranges being used by your 3C389 PC
Card (8-KB default).
Windows NT 3.51 Installation 3-7