3Com 3CCFEM556 User Manual page 10

4 C 1: I
HAPTER
3 Load the network driver and supply the configuration
information that will give you access to your network.
What driver you load depends on your network. Choosing
and loading the driver are automatic as part of the Setup
procedure. For Windows NT 4.0, Windows 95, Windows 3.x
(including Windows 3.1 and Windows for Workgroups 3.11),
and DOS, you must follow the procedures documented in
this guide to manually configure the LAN+Modem card.
4 Load and configure the communications software
you will use for data and fax transmissions.
Communications software is provided with the
LAN+Modem card. You can also use the modem with
resident communications applications such as Terminal and
HyperTerminal.
NTRODUCTION