Table of Contents
Advertisement
74
C
6: G
HAPTER
ETTING
Call Pickup
M
Y
T
ORE FROM
OUR
ELEPHONE
CLIR for All External Calls
To enable CLIR-All for all calls from your telephone:
1 Pick up the handset, and press Feature + 889. The Confirmation Tone
plays.
2 Dial the number that you want to call.
The NBX system does not send caller ID information on this call or any
future calls until you disable this feature.
When CLIR is enabled, you hear the Feature Enabled Tone when you pick
up the handset.
To disable CLIR-All:
1 Pick up the handset.
2 Press Feature + 889 again. The Confirmation Tone plays.
To view your current CLIR-All setting, log in to the NBX NetSet Utility and
go to My Calling Privileges > Feature Settings.
CLIR for Next External Call Only
To enable CLIR for only the next call from your telephone:
1 Pick up the handset.
2 Press Feature + 890. The Confirmation Tone plays.
3 Dial the number that you want to call.
When you disconnect the call, the CLIR feature is no longer in effect.If
you hang up the handset without making a call, the CLIR-NEXT feature
remains active and will apply to the next external call that you make.
Use the Call Pickup feature to answer a call that is ringing on another
telephone. This feature is best arranged in advance when you and
another user know that it would be convenient or necessary to answer
calls ringing on that user's telephone.
You can answer a call that is ringing on another telephone only if you and
that user both are members of the same Call Pickup group or if that user
is a member of a Call Pickup group that allows "nonmember pickup."
Your administrator configures call pickup groups and can tell you which
group you belong to.
S
YSTEM
Advertisement
Table of Contents
