Table of Contents
Advertisement
46
C
4: S
HAPTER
TANDARD
Putting a Call
on Hold
Dialing Another Call
Transferring a Call
F
EATURES
If Call Forward No Answer is enabled and Call Forward All and Do Not
Disturb are not enabled, all calls received when this extension is not
busy are forwarded to the Call Forward No Answer destination after
the specified number of rings. All other feature settings are ignored.
If Forward to Mail is enabled and Call Forward All, Do Not Disturb, Call
Forward No Answer, and Call Forward Busy are not enabled, all calls
received when this extension is not busy are forwarded to the Call
Forward Default destination after one ring.
If no call forwarding settings are enabled, all calls received this
extension is busy are immediately forwarded to the Call Forward
Default destination. If this extension is not busy, all calls are forwarded
to the Call Forward Default destination after the number of rings
specified in the Call Forward Default page of the NBX NetSet utility.
You can put a call on hold for any reason.
On a 3Com 3100 Entry Telephone:
1 Press and release the hook switch.
2 To return to the call, press and release the hook switch again.
You can place a call on hold to dial a new call,
On a 3Com 3100 Entry Telephone:
1 Press and release the hook switch.
2 When you hear the dial tone, dial the second call.
If you hang up without returning to the call on hold, your telephone rings
to reconnect you to the call on hold.
When you answer an incoming telephone call, the Transfer feature allows
you to send that call from your telephone to any other internal line or, if
your call permissions allow, to an outside line. To view your permissions,
log in to the NBX NetSet utility and go to My Calling Privileges > Call
Permissions. Your administrator can change your call permissions.
Advertisement
Table of Contents
