Table of Contents
Advertisement
88
C
9: G
HAPTER
ETTING
Call Pickup
M
Y
T
ORE FROM
OUR
ELEPHONE
To disable CLIR-All:
1 Pick up the handset.
2 Press the Feature button and 889 again. CLIR-ALL off appears briefly in
the display panel and then disappears when you hang up the handset.
To view your current CLIR-All setting, log in to NBX NetSet >
User Information > Feature Settings.
CLIR for Next External Call Only
To enable CLIR for only the next call from your telephone:
1 Pick up the handset.
2 Press the Feature button and 890. The telephone display panel shows
CLIR-NEXT on.
3 Dial the number that you want to call.
4 When you disconnect the call, the CLIR feature is no longer in effect.
CLIR-NEXT on disappears from the display panel.
If you hang up the handset without making a call, the CLIR-NEXT feature
remains active and will apply to the next external call that you make. If
you are unsure about whether CLIR-NEXT is active, pick up the handset,
press Feature and 890, and read the status message in the display panel
of your telephone.
Use the Call Pickup feature to answer a call that is ringing on another
telephone. This feature is best arranged in advance when you and
another user know that it would be convenient or necessary to answer
calls ringing on that user's telephone.
You can answer a call that is ringing on another telephone only if you and
that user both are members of the same Call Pickup group or if that user
is a member of a Call Pickup group that allows "nonmember pickup."
Your administrator configures call pickup groups and can tell you which
group you belong to.
To view the list of Call Pickup groups of which you are a member:
1 Log in to NBX NetSet > User Information > Call Pickup.
2 Select the group number that you want to view from the Group List, and
click Details to display the list of members of that group.
S
YSTEM
Advertisement
Table of Contents
