Table of Contents
Advertisement
84
C
6: G
HAPTER
ETTING
WhisperPage
M
Y
T
ORE FROM
OUR
ELEPHONE
In the case of an incoming call, Call Privacy cannot be activated while the
session is alerting. In this case, you must answer the incoming call before
activating Call Privacy.
To deactivate (toggle off) Call Privacy:
While Call Privacy is on, press Feature + 428 again.
A confirmation tone indicates that Call Privacy is now disabled.
When any active Call Privacy session ends, (for example: you activate Call
Privacy, initiate a call, and then exit the call) the Call Privacy settings are
no longer applicable and the next call is open to monitoring.
The WhisperPage feature allows you to dial an NBX extension that is
involved in an active conversation with another person and speak to that
person without the other party on the call being able to hear you.
WhisperPage is typically used in the workplace by an assistant and
manager. While a manager is on a call, an assistant can start a
WhisperPage session to alert the manager of an important meeting or
call. During the WhisperPage session, the assistant cannot hear the
manager or the third party and the third party cannot hear the comments
of the assistant.
If the manager is not on an active call when the assistant starts a
WhisperPage session, the call is placed just as if the assistant dialed the
manager's extension.
Both the manager and the assistant in a WhisperPage session must be
assigned to an NBX WhisperPage domain and have appropriate
WhisperPage access privileges.
To view your WhisperPage access privileges, log in to the NBX NetSet
Utility and go to System Group Settings > WhisperPage. This page
reports the following information:
Whether or not the WhisperPage alert tone is enabled.
The period of time in seconds (called decline time) before an initiated
WhisperPage session becomes active.
Users (listeners) with whom you can initiate a WhisperPage session
S
YSTEM
Advertisement
Table of Contents
